The key components of a raised access flooring system can be defined as follows:
This is the horizontal load bearing component of a raised floor. lt is normally 600 x 600 mm Or 500*500 mm, these floor anels will be supplied as either bare finished to accept a carpet tile finish on site or, with a factory bonded High pressure laminate or PVC Laminated finish.
This is the complete vertical, adjustable supporting structure to the raised floor panels. The pedestals are normally bonded to the sub floor using an epoxy / polyurethane adhesive with mechanical fixings also provided if required. The pedestal assembly provides vertical adjustment of 25mm to allow the raised floor to be installed flat and level despite undulations in the sub floor. The pedestal head provides panel location and also when required a means of fixing the panel to the pedestal head.
This is a horizontal component that connects pedestals together. lt connects to the pedestal head and is used to provide additional lateral support at greater floor height and/or increase the structural performance of the raised floor system.
Address：No.188, yanzhuang bridge, yaoguan town, wujin district, changzhou